Yamaha NP-11 de handleiding

Categorie
Digitale piano's
Type
de handleiding

Deze handleiding is ook geschikt voor

Owners Manual
EN
NP-31/NP-11 Owner’s Manual
2
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply (adapter).
DO NOT connect this product to any power supply or adapter other
than one described in the manual, on the name plate, or specifically
recommended by Yamaha.
WARNING:
Do not place this product in a position where anyone could
walk on, trip over, or roll anything over power or connecting cords of any
kind. The use of an extension cord is not recommended! If you must use an
extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG.
NOTE: The smaller the AWG number, the larger the current handling
capacity. For longer extension cords, consult a local electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom-
pany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at
the time of printing. However, Yamaha reserves the right to change or
modify any of the specifications without notice or obligation to update
existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound levels
that could cause permanent hearing loss. DO NOT operate for long
periods of time at a high volume level or at a level that is uncomfort-
able. If you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be dealer
assembled or installed. Please make sure that benches are stable and
any optional fixtures (where applicable) are well secured BEFORE
using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are
not covered by the manufacturer’s warranty, and are therefore the
owners responsibility. Please study this manual carefully and consult
your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be
aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of bat-
tery is approximately five years. When replacement becomes necessary,
contact a qualified service representative to perform the replacement.
This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery being
charged.
When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating and
battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all bat-
teries away from children. Dispose of used batteries promptly and as
regulated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some rea-
son its useful life is considered to be at an end, please observe all
local, state, and federal regulations that relate to the disposal of prod-
ucts that contain lead, batteries, plastics, etc. If your dealer is unable
to assist you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The model
number, serial number, power requirements, etc., are located on this
plate. You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this manual
as a permanent record of your purchase.
Model
Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
92-BP (bottom)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not
expressly approved by Yamaha may void your authority, granted by
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class “B” digital
devices. Compliance with these requirements provides a reason-
able level of assurance that your use of this product in a residential
environment will not result in harmful interference with other elec-
tronic devices. This equipment generates/uses radio frequencies
and, if not installed and used according to the instructions found in
the users manual, may cause interference harmful to the operation
of other electronic devices. Compliance with FCC regulations does
not guarantee that interference will not occur in all installations. If
this product is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please con-
tact Yamaha Corporation of America, Electronic Service Division,
6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
NP-31/NP-11 Owner’s Manual
3
About the Manuals................................................ 4
Accessories .......................................................... 4
PRECAUTIONS.................................................... 5
Introduction
Setting Up 7
Power Requirements ............................................ 7
Connecting Headphones or an Audio Device
(PHONES/OUTPUT Jack) ............................... 8
Connecting a Footswitch or a Foot Pedal
(SUSTAIN Jack) .............................................. 8
Turning the Power On .......................................... 8
Auto Power Off Function ...................................... 8
Using the Music Rest............................................ 8
Panel Controls and Terminals 9
Reference
Selecting & Playing Voices 10
Selecting Voices................................................. 10
Combining Voices (Dual).................................... 11
Listening to the Voice Demo Songs 12
Listening to the Piano Demo Songs 13
Using the Metronome 14
Other Settings 16
Adding Variations to the Sound – Reverb .......... 16
Transposing the Pitch......................................... 17
Fine Tuning of the Pitch...................................... 17
Touch Sensitivity ................................................ 18
Disabling the Auto Power Off Function............... 18
Connecting MIDI Instruments 19
Connecting to the MIDI [IN] [OUT] terminals ...... 19
MIDI Capabilities ................................................ 19
MIDI Functions 20
Troubleshooting 21
Optional Equipment 21
Appendix
Specifications 22
Index 23
Table of Contents
NP-31/NP-11 Owner’s Manual
4
Thank you for purchasing the Yamaha digital keyboard!
We recommend that you read this manual carefully so that
you can fully take advantage of the advanced and convenient
functions of the instrument.
We also recommend that you keep this manual in a safe and
handy place for future reference.
This instrument has the following documents and instructional materials.
Included Documents
Owner’s Manual (this book)
This Owner’s Manual describes how to use the functions of the instrument.
Before using the instrument, be sure to read the Precautions on pages 5 – 6.
Quick Operation Guide
This Quick Operation Guide shows and explains in chart form the operation of the functions assigned
to the buttons and the keyboard for quick and easy understanding.
Online Materials (downloadable from the web)
The following instructional materials are available for downloading from the Yamaha website.
Yamaha Manual Library http://www.yamaha.co.jp/manual/
Access the Yamaha Manual Library, then enter your model name (NP-31, for example) in the Model Name area
to search for a specific manual.
MIDI Reference
This contains the MIDI Data Format, the MIDI Implementation chart and detailed explanations about
the MIDI settings of the instrument.
MIDI Basics (only in English, French, German and Spanish)
If you want to know more about MIDI and how to use it, refer to this introductory book.
• Owner’s Manual
• Quick Operation Guide
• Music Rest
• AC Power Adaptor
* May not be included depending on your particular area.
Please check with your Yamaha dealer.
• My Yamaha Product User Registration
* The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.
About the Manuals
Accessories
NP-31/NP-11 Owner’s Manual
5
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-
circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not place the power cord near heat sources such as heaters or radiators, and
do not excessively bend or otherwise damage the cord, place heavy objects on it,
or place it in a position where anyone could walk on, trip over, or roll anything
over it.
Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
Use the specified adaptor (page 22) only. Using the wrong adaptor can result in
damage to the instrument or overheating.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, place on it any containers (such as vases, bottles or glasses)
containing liquids which might spill into any openings. If any liquid such as water
seeps into the instrument, turn off the power immediately and unplug the power
cord from the AC outlet. Then have the instrument inspected by qualified Yamaha
service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
Always replace all batteries at the same time. Do not use new batteries together
with old ones.
Do not mix battery types, such as alkaline batteries with manganese batteries, or
batteries from different makers, or different types of batteries from the same
maker, since this can cause overheating, fire, or battery fluid leakage.
Do not tamper with or disassemble batteries.
Do not dispose of batteries in fire.
Do not attempt to recharge batteries that are not intended to be charged.
Keep batteries away from children.
If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid
should come in contact with your eyes, mouth, or skin, wash immediately with
water and consult a doctor. Battery fluid is corrosive and may possibly cause loss
of sight or chemical burns.
Always make sure all batteries are inserted in conformity with the +/- polarity
markings. Failure to do so might result in overheating, fire, or battery fluid
leakage.
When the batteries run out, or if the instrument is not to be used for a long time,
remove the batteries from the instrument to prevent possible leakage of the battery
fluid.
When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. (If you are using batteries,
remove all batteries from the instrument.) Then have the device inspected by
Yamaha service personnel.
• The power cord or plug becomes frayed or damaged.
• It emits unusual smells or smoke.
• Some object has been dropped into the instrument.
• There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the
instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
When removing the electric plug from the instrument or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected cables.
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power cord
from the wall AC outlet.
Use only the stand specified for the instrument. When attaching the stand or rack,
use the provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set the desired
listening level.
Do not insert a finger or hand in any gaps on the instrument.
Never insert or drop paper, metallic, or other objects into the gaps on the panel or
keyboard. This could cause physical injury to you or others, damage to the
instrument or other property, or operational failure.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing loss.
If you experience any hearing loss or ringing in the ears, consult a physician.
Power supply/AC power adaptor
Do not open
Water warning
Fire warning
Battery
If you notice any abnormality
Power supply/AC power adaptor
Location
Connections
Handling caution
DMI-3 1/2
NP-31/NP-11 Owner’s Manual
6
Always turn the power off when the instrument is not in use.
Even when the power switch is in standby status, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make
sure you unplug the power cord from the wall AC outlet.
Make sure to discard used batteries according to local regulations.
NOTICE
To avoid the possibility of malfunction/damage to the product, or damage to other property, follow the notices below.
Handling and Maintenance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)
to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° –
40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Since speakers are built into the instrument you should be careful to never leave any video tapes, cassette tapes, floppy disks or any kind of magnetic
storage media on the panel—doing so may result in data loss or damage to the items.
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal
use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use
others' copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and
sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of
copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
About functions/data bundled with the instrument
Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.
The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
The serial number of this product may be found on the bottom of the
unit. You should note this serial number in the space provided below
and retain this manual as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
(bottom)
DMI-3 2/2
NP-31/NP-11 Owner’s Manual
7
Introduction
Setting Up
Be sure to do the following operations BEFORE turning on the power.
Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an
AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not
deplete resources.
Using an AC Power Adaptor
1 Make sure that the [ ] (Standby/On) switch of
the instrument is off (the power indicator located to
the left of the switch is off).
2 Connect the AC adaptor to the power supply jack.
3 Plug the AC adaptor into an AC outlet.
Using Batteries
1 Open the battery compartment cover located on the
instrument’s bottom panel.
2 Insert six new alkaline batteries, being careful to
follow the polarity markings on the side of the
compartment.
3 Replace the compartment cover, making sure that it
locks firmly in place.
For battery operation, the instrument requires six 1.5V
AA” size, LR6 or equivalent batteries. (Alkaline bat-
teries are recommended.) When battery power
becomes too low for proper operation, the volume
may be reduced, the sound may be distorted, and other
problems may occur. When this happens, make sure to
replace all batteries, following the precautions listed
below.
Power Requirements
• Use the specified adaptor (page 22). The use of other
adaptors may result in irreparable damage to both the
adaptor and the instrument.
• Unplug the AC Power Adaptor when not using the
instrument, or during electrical storms.
Never connect or disconnect the AC power adaptor when the power is on
and the batteries are installed. Doing so will turn the power off.
WARNING
CAUTION
AC power
adaptor
3
AC outlet
2
NOTE
• Make sure to install the batteries with the proper orienta-
tion, maintaining the correct polarity (as shown). Incorrect
battery installation may result in heat, fire and/or leaking of
corrosive chemicals.
• When the batteries run down, replace them with a com-
plete set of six new batteries. NEVER mix old and new bat-
teries. Do not use different kinds of batteries (e.g. alkaline
and manganese) at the same time.
• If the instrument is not to be used for a long time, remove
the batteries in order to prevent possible fluid leakage and
damage to the instrument.
WARNING
Setting Up
NP-31/NP-11 Owner’s Manual
8
Make sure to properly connect all external devices you are using (as shown below)
BEFORE turning the power on.
A pair of stereo headphones with a 1/4" stereo phone
plug can be plugged in the PHONES/OUTPUT jack
for convenient monitoring. The speakers are automati-
cally shut off when a plug is inserted into this jack.
The PHONES/OUTPUT jack also functions as an
external output. You can connect the PHONES/OUT-
PUT jack to a keyboard amplifier, stereo system,
mixer, tape recorder, or other line-level audio device
to send the instrument’s output signal to that device.
The SUSTAIN jack is for connecting the Footswitch or
foot pedal. The pedal functions in the same way as a
damper pedal on an acoustic piano. Connect an optional
footswitch FC4/FC5 to this jack and press the pedal to
sustain the sound. An optional FC3 Foot Pedal can also
be connected to this jack. If you connect an optional
FC3 Foot Pedal, the half pedal function* can be used.
* Half pedal function
If you are playing the piano with sustain but want to make the sound
between notes clearer, slightly release your foot from the pedal,
keeping the pedal down in half position or less.
Turn down the volume by turning the [MASTER
VOLUME] dial to the MIN position and press the
[ ] (Standby/On) switch to turn on the power. Press
the [ ] (Standby/On) switch again for a second to
turn the power to standby.
While playing the keyboard, adjust the volume level
by using the [MASTER VOLUME] dial.
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function that
automatically turns the power off if the instrument is
not operated for 30 minutes.
The Auto Power Off function can be set to on or off;
see page 18.
The instrument includes a music rest that can be
attached to the instrument by inserting it into the slot
at the top of the control panel.
Connecting Headphones or an Audio
Device (PHONES/OUTPUT Jack)
• Avoid listening with the headphones at high volume for
long periods of time; doing so may not only result in ear
fatigue, it may be damaging to your hearing.
• To prevent damage to the speakers, set the volume of the
external devices at the minimum setting before connecting
them. Failure to observe these cautions may result in elec-
tric shock or equipment damage. Also, be sure to set the
volumes of all devices at their minimum levels and gradu-
ally raise the volume controls while playing the instrument
to set the desired listening level.
Connecting a Footswitch or a Foot
Pedal (SUSTAIN Jack)
CAUTION
CAUTION
Make sure that the power is OFF when connecting or disconnecting the
Footswitch or the Foot Pedal.
Do not turn the power on while pressing the Footswitch or the Foot Pedal.
Otherwise, the switch or pedal type (on/off) will be reversed.
Turning the Power On
• Even when the switch is set to standby, electricity is still
flowing to the instrument at the minimum level. When you
are not using the instrument for a long time, make sure you
unplug the AC power adaptor from the wall AC outlet, and/
or remove the batteries from the instrument.
All panel settings are reset to the default values whenever the power is
turned off.
Auto Power Off Function
Using the Music Rest
NOTE
CAUTION
NOTE
NP-31/NP-11 Owner’s Manual
9
Panel Controls and Terminals
q [MASTER VOLUME] dial ........................ page 8
For adjusting the volume level of the entire sound.
w [ ] (Standby/On) switch ....................... page 8
For turning the power on or off.
e [DEMO] button...............................pages 12, 13
For playing all the Voice Demo Songs and Piano
Demo Songs.
r [METRONOME ON/OFF] button ...........page 14
For using the metronome.
t VOICE buttons ...............................pages 10, 11
For selecting the Voices (instrument sounds), such
as Grand Piano.
y TEMPO [t] [s]/BEAT [<] [> ] buttons
................................................................page 14
The tempo and beat of the metronome can be
changed by using these buttons while holding the
[METRONOME ON/OFF] button. The TEMPO
buttons also affect the tempo of the Demo Song.
u [VARIATION] button ..............................page 10
For selecting a different Voice for the Voice button.
i [SUSTAIN] jack ........................................page 8
For connecting a pedal, optional FC3 Foot Pedal or
FC4/FC5 Footswitch.
o MIDI [IN] [OUT] terminals .....................page 19
For connecting external MIDI devices, allowing
the use of various MIDI functions.
!0 [PHONES/OUTPUT] jack ........................page 8
For connecting a set of standard stereo head-
phones, allowing private practice.
This jack also functions as an external output.
!1 DC IN jack ................................................page 7
For connecting the power adaptor.
q
!0 !1 io
wer t u
y
C2C1 C3 C4 C5 C6
NP-11
Shows the jacks and terminals as
seen when viewed from the rear
of the instrument.
(The illustration shows
the NP-31)
Shows the jacks and terminals as
seen when viewed from the rear
of the instrument.
NP-31/NP-11 Owner’s Manual
10
Reference
Selecting & Playing Voices
To familiarize yourself with the character-
istics of the Voices, listen to the Voice
Demo Songs for each Voice (page 12).
Voice:
The term “Voice” refers to a musical
instrument sound built into the Digital
Musical Instrument.
When you select a Voice, an appropriate
reverb type will be selected automatically
(page 16).
1
Press one of the Voice buttons.
Two different Voices are assigned to each Voice button. You can switch
between them by pressing the [VARIATION] button. After the [Grand Piano]
is pressed, for example, turning on [VARIATION] will call up the Grand Piano
2 Voice while turning off [VARIATION] will call up the Grand Piano 1 Voice.
2
Adjust the volume.
Rotate the [MASTER VOLUME] dial to set the most comfortable listening
level during your performance.
Selecting Voices
TERMINOLOGY
NOTE
NOTE
Voice Button Voice Name Description
GRAND
PIANO
Grand Piano 1
Recorded samples from a full concert grand piano.
Perfect for classical compositions as well as any
other style that requires acoustic piano.
VARIATION Grand Piano 2
Clear piano with bright reverb. Good for popular
music.
E.PIANO E. Piano 1
An electronic piano sound created by FM synthesis.
Good for popular music.
VARIATION E. Piano 2
The sound of an electric piano using hammer-struck
metallic “tines.” Soft tone when played lightly, and an
aggressive tone when played hard.
PIPE ORGAN Pipe Organ 1
This is a typical pipe organ sound (8' + 4' + 2'). Good
for sacred music from the Baroque period.
VARIATION Pipe Organ 2
This is the organ’s full coupler sound, often associ-
ated with Bach’s “Toccata and Fugue.
STRINGS/
VIBES
Strings
Spacious and large-scale string ensemble. Try com-
bining this Voice with piano in DUAL.
VARIATION Vibraphone
The sound of a vibraphone played with relatively soft
mallets.
HARPSI-
CHORD
Harpsichord 1
The definitive instrument for baroque music. Since
the strings of a harpsichord are plucked, there is no
touch response.
VARIATION Harpsichord 2
Mixes the same Voice an octave higher for a more
brilliant, dynamic tone.
Selecting & Playing Voices
NP-31/NP-11 Owner’s Manual
11
You can play Voices simultaneously across the entire range of the keyboard. In this way, you can combine similar
Voices to create a thicker sound.
Dual mode cannot be used with two
Voices of the single Voice button (for
example, strings and vibraphone).
Reverb in Dual
The reverb type assigned to Voice 1 will
take priority. If the reverb assigned to
Voice 1 is set to OFF, the reverb assigned
to Voice 2 will be in effect.
Refer to “Selecting Voices” on page 10 for
more information on the Voices that are
assigned to the [VARIATION] button.
1
Press two Voice buttons simultaneously to engage Dual.
The Voice assigned to the left side button will be designated as Voice 1, and the
Voice assigned to the right side button will be designated as Voice 2.
Usin g Variation Voices in Du a l mode
To select a Variation Voice in Dual mode, first select the desired Voice, then
press the [VARIATION] button. Finally, press the two desired Voice buttons
simultaneously. If either of the Voices is a Variation Voice, the [VARIATION]
indicator lights. To use (or cancel) Variation for both Voices, simply press the
[VARIATION] button so that the indicator lights (or goes off).
2
To exit from Dual, press one of the Voice buttons.
Setting the Octave
While holding down the [VARIATION] button, press one of the C4 – D4 keys
to shift the pitch up or down in octave steps for Voice 1.
While holding down the [VARIATION] button, press one of the D#4 – F4 keys
to shift the pitch up or down in octave steps for Voice 2.
Setting the Volume Balance
While hold down the [VARIATION] button, press one of the F#4 – F#5 keys
(see the illustration) to adjust the volume balance between two Voices. A set-
ting of “0” produces equal balance between Voices 1 and 2. Values below “0”
(to “-6”) decrease the volume of Voice 1 and increase the volume of Voice 2;
values above “0” (to “6”) increase the volume of Voice 1 and decrease the vol-
ume of Voice 2.
Combining Voices (Dual)
NOTE
NOTE
NOTE
F4 C5 C6C4
NP-11
NP-31
Voice 1 Voice 2
Voice 1
C4 -1
Voice 2
D#4-1
C#40 E4 0
D4 +1 F4 +1
C5 (0) C6C4
F#5 (+6)F#4 (-6)
NP-11
NP-31
NP-31/NP-11 Owner’s Manual
12
Listening to the Voice Demo Songs
The instrument features special Voice Demo Songs that effectively showcase each of the Voices.
Refer to the Voice list on page 10 for more
information on the characteristics of each
preset Voice.
The Voice Demo Songs are not transmit-
ted via MIDI.
Simply pressing the [DEMO] button starts
the Demo Song sequence from the Grand
Piano 1 Voice.
The [VARIATION] indicator is lit while the
Demo Song of the Variation Voice is play-
ing back.
You can adjust the tempo of the Voice
Demo Song during playback.
For instructions on setting the tempo, see
page 14.
1
While holding down the [DEMO] button, press one of the Voice
buttons to start the Voice Demo Song.
The Songs provided for each Voice will play back in sequence.
Changing a Voice Demo Song
During playback, you can change the Voice Demo Song by pressing a different
Voice button.
In addition, you can select a different Voice Demo Song for the Variation
Voice by pressing the [VARIATION] button.
The Voice Demo Song List
The demonstration pieces listed above are short rearranged excerpts of the original composi-
tions.
All other songs are original (© 2011 Yamaha Corporation).
2
Press the [DEMO] button to stop
playback.
NOTE
NOTE
NOTE
NOTE
NOTE
Voice Name Title Composer
Harpsichord 1 Gavotte J.S. Bach
Harpsichord 2 Invention No. 1 J.S. Bach
NP-31/NP-11 Owner’s Manual
13
Listening to the Piano Demo Songs
The instrument provides Piano Demo Songs as well as Voice Demo Songs, for your listening pleasure.
You can play the keyboard along with the
Piano Demo Song. You can also change
the Voice for playing on the keyboard.
When you select a different Song (or a dif-
ferent Song is selected during chained
playback), an appropriate reverb type will
be selected accordingly.
You can adjust the tempo of the Piano
Demo Song during playback.
For instructions on setting the tempo, see
page 14.
1
While holding down the [DEMO] button, press one of the 1 – 10
(C#1 – A#1) keys to start the desired Song.
The Piano Demo Songs are assigned to the 1 – 10 (C#1 – A#1) keys.
The selected Piano Preset Song will play back followed by the rest of the
Songs in sequence.
The Piano Demo Songs are not transmit-
ted via MIDI.
Piano Demo Song List
NP-31
NP-11
2
Press the [DEMO] button to stop
playback.
NOTE
NOTE
NOTE
NOTE
No. Title Composer
1 Menuett G dur BWV.Anh.114 J.S. Bach
2 Turkish March (Piano Sonate No.11 K.331) W.A. Mozart
3 Für Elise L.v. Beethoven
4 Valse op.64-1 “Petit chien F.F. Chopin
5 Träumerei R. Schumann
6 Dolly’s Dreaming and Awakening T. Oesten
7 Arabesque J.F.F. Burgmüller
8 Humoresque A. Dvo
řák
9 The Entertainer S. Joplin
10 La Fille aux Cheveux de Lin C.A. Debussy
No. Title Composer
1 Invention No. 1 J.S. Bach
2 Prelude (Wohltemperierte Klavier I No.1) J.S. Bach
3 Le Coucou L-C. Daquin
4 Turkish March W.A. Mozart
5 Little Serenade J. Haydn
6 Ecossaise L.v. Beethoven
7 Moments Musicaux op.94-3 F.P. Schubert
8 Valse op.69-1 “L’adieu” F.F. Chopin
9 Fröhlicher Landmann R. Schumann
10 La chevaleresque J.F. Burgmüller
NP-31/NP-11 Owner’s Manual
14
Using the Metronome
This instrument features a built-in metronome (a device that keeps an accurate tempo) that is convenient for prac-
ticing.
1
Press the [METRONOME ON/OFF]
button to start the Metronome.
2
Press the [METRONOME ON/OFF]
button to stop the Metronome.
Setting the Beat
Default setting:
The “Default setting” refers to the factory
setting obtained when you first turn on the
power to the instrument.
While holding down the [METRONOME ON/OFF] button, use the BEAT [<]
button or the BEAT [>] button to select the Beat from 0, 2, 3, 4, 5 and 6.
The first Beat is accented with a bell sound and the rest with clicks. The
default setting is 0. In this setting, clicks sound for all beats.
The beat can also be changed by the following operation.
While holding down the [METRONOME ON/OFF] button, press one of the
keys C3 – F3.
Adjusting the Tempo
Setting range: q = 32 – 280
Default setting: 120
While holding down the [METRONOME ON/OFF] button, use the TEMPO
[t] or [s] button to decrease or increase in single steps.
While holding down the [METRONOME ON/OFF] button, press both
TEMPO [t]/[s] buttons simultaneously to restore the default tempo.
TERMINOLOGY
Key Beat
C3 0
C#32
D3 3
D#34
E3 5
F3 6
C3 F3C1 C2
NP-31
NP-11
NOTE
NOTE
Using the Metronome
NP-31/NP-11 Owner’s Manual
15
Also, while holding down the [METRONOME ON/OFF] button, use the fol-
lowing keys to increase or decrease in single or ten steps.
Increasing the tempo value in steps of one:
While holding down the [METRONOME ON/OFF] button, press the F#2 key.
Decreasing the tempo value in steps of one:
While holding down the [METRONOME ON/OFF] button, press the E2 key.
Increasing the tempo value in steps of ten:
While holding down the [METRONOME ON/OFF] button, press the G2 key.
Decreasing the tempo value in steps of ten:
While holding down the [METRONOME ON/OFF] button, press the D#2 key.
Resetting the tempo to default:
While holding down the [METRONOME ON/OFF] button, press the F2 key.
Entering a specific tempo number
The numbers 0 – 9 are assigned to the keys C1 – A1, respectively (see below).
While holding down the [METRONOME ON/OFF] button, press the appropri-
ate 0 (C1) – 9 (A1) keys in sequence to specify a two or three-digit number.
Select a number starting from the left-most digit. For example, to set the tempo
to “95,” press the 9 (A1) and 5 (F1) keys in sequence.
Adjusting the volume
Setting range:
C4 (1) – G5 (20)
Default setting:
A4 (10)
You can change the volume of the metronome sound.
While holding down the [METRONOME ON/OFF] button, press one of the C4
– G5 keys to determine the volume.
Pressing a higher key results in a higher volume, while pressing a lower key
results in a lower volume.
C3C2
G2 (+10)C1
E2 (-1)
D#2 (-10)
F#2 (+1)
NP-31
NP-11
F2 (default)
NOTE
C6C4
(1)
C5 G5
(20)
NP-11
NP-31
NP-31/NP-11 Owner’s Manual
16
Other Settings
This control enables you to select four different types of reverb effect that add extra depth and expression to the
sound to create a realistic acoustic ambience.
Selecting a Reverb Type
The appropriate Reverb Type and Depth
are automatically set when a Voice is
selected.
While holding down the [VARIATION] button, press one of the C2 – E2 keys
to select a reverb type (as shown above).
Adjusting Reverb Depth
Setting range:
0 (no effect) – 10 (maximum depth)
While holding down the [VARIATION] button, press one of the C1 – A#1 keys
to adjust the reverb depth for the selected Voice.
The depth value increases as you press higher keys.
While holding down the [VARIATION] button, press the B1 key to set the
reverb to the depth most suitable for the selected Voice.
Adding Variations to the Sound – Reverb
Key Reverb Type Description
C2 Room
This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
C#2 Hall1
For a “bigger” reverb sound, use the HALL 1 setting. This effect
simulates the natural reverberation of a small-size concert hall.
D2 Hall2
For a truly spacious reverb sound, use the HALL 2 setting. This
effect sim-ulates the natural reverberation of a large concert hall.
D#2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
NOTE
E2C1 C2
NP-31
NP-11
NOTE
C1 (0) C2B1
A#1 (10)
NP-31
NP-11
Other Settings
NP-31/NP-11 Owner’s Manual
17
The Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals to
facilitate playing in difficult key signatures, and to let you easily match the pitch of the keyboard to the range of a
singer or other instruments. For example, if you set the transposition amount to “+5,playing a C key actually pro-
duces a pitch of F. In this way, you can play a song as though it were in C major, and the instrument will transpose it
to the key of F.
Setting the amount of transposition
While holding down the [DEMO] button, press and hold the [METRONOME
ON/OFF] button, then press one of the F#2 – F#3 keys to set the desired
amount of transposition.
Setting range:
F#2 (-6 semitones) – C3 (normal pitch) –
F#3 (+6 semitones)
To transpose the pitch down (in semitone steps)
While holding down the [DEMO] button, press and hold the [METRONOME ON/
OFF] button, then press any key between F#2 and B2.
To transpose the pitch up (in semitone steps)
While holding down the [DEMO] button, press and hold the [METRONOME ON/
OFF] button, then press any key between C#3 and F#3.
To restore the normal pitch
While holding down the [DEMO] button, press and hold the [METRONOME ON/
OFF] button, then press the C3 key.
You can fine tune the pitch of the entire instrument. This function is useful when you play the instrument along
with other instruments or CD music.
Setting the Pitch
Hz (Hertz):
This unit of measurement refers to the fre-
quency of a sound and represents the
number of times a sound wave vibrates in
a second.
Setting range: 427.0 – 453.0 Hz
Default setting: A3 = 440Hz.
To lower or raise the pitch (in steps of roughly 1.0 Hz):
While holding down the [DEMO] button, press and hold the [METRONOME ON/
OFF] button, then press G3 (to lower) or B3 (to raise).
To lower or raise the pitch (in steps of roughly 0.2 Hz):
While holding down the [DEMO] button, press and hold the [METRONOME ON/
OFF] button, then press G#3 (to lower) or A#3 (to raise).
To restore standard pitch:
While holding down the [DEMO] button, press and hold the [METRONOME ON/
OFF] button, then press C3.
Transposing the Pitch
C1 C2
F#3F#2 C3
0
-1
-2 +1 +3-4
-3-5 +2 +4 +5
-6 +6
NP-31
NP-11
NOTE
Fine Tuning of the Pitch
TERMINOLOGY
NOTE
G#3 (-0.2Hz) A#3 (+0.2Hz)
C1 C2 C3
B3 (+1.0Hz)G3 (-1.0Hz)
NP-31
NP-11
A3 (standard pitch)
Other Settings
NP-31/NP-11 Owner’s Manual
18
You can adjust the volume level that changes depending on how fast or strong you hit the keys.
The following four settings are available.
Setting the Touch Sensitivity Type
The touch sensitivity settings may have
little or no effect with Pipe Organ 1, 2 and
Harpsichord 1, 2 Voices that are not nor-
mally responsive to keyboard dynamics.
Default setting: Medium
While holding down the [VARIATION] button, press one of the A5 – C6 keys
to select the desired touch sensitivity.
To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automati-
cally turns the power off if the instrument is not used—i.e., no buttons or keys are pressed—for approximately 30
minutes.
If you do not want to use the Auto Power Off function, change the setting as follows.
Default setting: Enable
Turn the power of the instrument off. Then, while holding down the lowest key,
press the [ ] (Standby/On) switch to turn on the power again so that the
[VARIATION] indicator flashes 3 times, after which the Auto Power Off func-
tion is disabled.
If you want to disable the Auto Power Off function without turning the power
off, hold down the [DEMO] button, then press and hold the [METRONOME
ON/OFF] button, then press the A5 key.
Re-enabling the Auto Power Off Function
While holding down the [DEMO] button, press and hold the [METRONOME ON/
OFF] button, then press the G#5 key to enable the Auto Power Off function again.
Touch Sensitivity
Key Touch Sensitivity Description
A5 FIXED
The volume level does not change at all regardless of whether you play the keyboard
soft or hard.
A#5 SOFT The volume level does not change much when you play the keyboard soft or hard.
B5 MEDIUM This is the standard piano touch response (default setting).
C6 HARD
The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic
and dramatic expression. You have to hit the keys hard to produce a loud sound.
NOTE
NOTE
C6A5
NP-11
NP-31
Disabling the Auto Power Off Function
NOTE
NP-31
NP-11
NP-11
NP-31
G#5 (enable)
A5 (disable)
NP-31/NP-11 Owner’s Manual
19
Connecting MIDI Instruments
The instrument features MIDI IN/OUT terminals, allowing you to connect the instrument to other instruments and
devices—including computers—and take advantage of the various performance and recording capabilities in
MIDI applications.
Since MIDI data that can be transmitted or
received varies depending on the type of
MIDI device, check the chapter “MIDI data
format” on page 4 in “MIDI Reference” to
find out what MIDI data and commands
your devices can transmit or receive.
MIDI [IN] [OUT] terminals
Use MIDI cables to connect external MIDI devices to
these connectors.
About MIDI
MIDI (Musical Instrument Digital Interface) is a standard format for data transmis-
sion/ reception. It enables the transmission of performance data and commands
between MIDI devices and personal computers. Using MIDI, you can control a con-
nected MIDI device from the instrument, or control the instrument from a con-
nected MIDI device or computer.
MIDI functions enable you to transmit performance data between MIDI devices.
You cannot transmit the Voice Demo
Songs and the Piano Preset Songs from
the instrument to another MIDI device.
For MIDI connections, use a standard
(optional) MIDI cable, available at most
musical instrument stores.
When the instrument is used as a tone
module, performance data with Voices
that are not found on the instrument will
not be played correctly.
Transmitting performance data to and from another MIDI device
Transmitting performance data to and from a computer
You must install an appropriate software
application on the computer to be able to
transmit performance data between the
instrument and a computer.
Connecting the USB port on the computer to the instrument via an
optional USB-MIDI interface (such as the Yamaha UX16)
Use a USB-MIDI interface device to connect the USB port on your computer
to the instrument’s MIDI terminals. You must install the USB-MIDI interface
(such as the UX16) driver. For more information, refer to the user’s manual
that came with the USB-MIDI interface device.
Connecting to the MIDI [IN] [OUT] terminals
NOTE
MIDI Capabilities
NOTE
• Before connecting the instrument to other electronic components, turn off the power of all
the components.
NOTICE
NOTE
NOTE
Instrument
MIDI [OUT] terminal
MIDI device
MIDI cables
(optional)
MIDI [IN] terminal
MIDI [OUT] terminal MIDI [IN] terminal
Computer
USB terminal
USB-MIDI interface
(optional)
Instrument
MIDI [IN] terminal MIDI [OUT]terminal
NOTE
• When connecting the instrument to a computer, first turn off the power to the instru-
ment, and then exit any open applications on the computer before connecting any
cables. After making all connections, turn on the power to the instrument.
NOTICE
NP-31/NP-11 Owner’s Manual
20
MIDI Functions
While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button, then press the
appropriate key indicated in the list below to make detailed adjustments to the MIDI settings.
For details on the specific keys and the corresponding setting values, please refer to the included “Quick Opera-
tion Guide.
Detailed instructions for making MIDI settings are explained in the MIDI Reference document, which can be
downloaded from the Yamaha Manual Library on the Internet. (For details, please refer to the section “About the
Manuals” on page 4.)
Key Setting item
Setting
value
Default Description
C1 – E2
Setting the MIDI Transmit
Channel
1 – 16, OFF
Channel1
This parameter enables you to specify the channel over which the
instrument transmits MIDI data.
C4 – F5
Setting the MIDI Receive
Channel
1 – 16, 1 + 2,
ALL
ALL
This parameter enables you to specify the channel over which the
instrument receives MIDI data.
A#5
Setting Local Control ON/
OFF
ON/OFF ON
This parameter enables you to set Local Control to ON or OFF.
Local control can be set to OFF so that the instrument does not
play the internal Voices, but the appropriate MIDI information is
still transmitted via the MIDI OUT terminal when notes are played
on the instrument.
B5
Setting Program Change
ON/OFF
ON/OFF ON
This parameter enables you to set Program Change to ON or
OFF.
This function makes it possible to cancel program change number
reception and transmission so that Voices can be selected on the
instrument without affecting the external MIDI device.
C6
Setting Control Change
ON/OFF
ON/OFF ON
This parameter enables you to set Control Change ON or OFF.
This function makes it possible to cancel control change data
reception and transmission so that, for example, the pedal of the
instrument and other controls can be operated without affecting
an external MIDI device.
NP-31/NP-11 Owner’s Manual
21
Troubleshooting
Optional Equipment
Headphones (HPE-150/HPE-30)
Foot Pedal (FC3)
Footswitch (FC4/FC5)
Keyboard Stand (L-2C)
USB-MIDI interface (UX16 )
AC Power Adaptor:
Users within U.S or Europe: PA-150 or an equivalent, Others: PA-5D, PA-150 or an equivalent (for the NP-31)
Users within U.S or Europe: PA-130 or an equivalent, Others: PA-3C, PA-130 or an equivalent (for the NP-11)
Problem Possible Cause and Solution
The instrument does not turn on.
The instrument has not been plugged in properly. Securely insert the female
plug into the jack on the instrument, and the male plug into a proper AC outlet
(page 7).
The batteries are low or dead. Replace all six batteries with completely new
alkaline ones, or use the optional AC adaptor.
Noise is heard from the speakers or
headphones.
The noise may be due to interference caused by the use of a mobile phone in
close proximity to the instrument. Turn off the mobile phone, or use it further
away from the instrument.
The batteries are low or dead. Replace all six batteries with completely new
alkaline ones, or use the optional AC adaptor.
The overall volume is low, or no sound
is heard.
The Master Volume is set too low; set it to an appropriate level using the [MAS-
TER VOLUME] dial.
Make sure a pair of headphones is not connected to the headphones jack
(page 8).
Make sure that Local Control (page 20) is ON.
The batteries are low or dead. Replace all six batteries with completely new
alkaline ones, or use the optional AC adaptor.
The sound is distorted.
If you are using manganese batteries with the instrument, try replacing them
with a set of new alkaline batteries. Alternately, you could use the AC adaptor
instead, or try turning down the volume.
The sustain pedal has no effect.
The pedal cable/plug may not be properly connected. Make sure to securely
insert the pedal plug into the SUSTAIN jack (page 8).
The pitch and/or tone of the piano
Voices in certain ranges do not sound
right.
The piano Voices attempt to precisely simulate actual piano sounds. However,
as a result of sampling algorithms, overtones in some ranges may sound exag-
gerated, producing a somewhat different pitch or tone.
Power suddenly and unexpectedly
turns off.
This is normal and the Auto Power Off function may have been activated. If you
need to disable the Auto Power Off function, select “Off” in the function settings
(page 18).
NP-31/NP-11 Owner’s Manual
22
Specifications
* When an optional FC3 Foot Pedal is connected, the half pedal effect can be used.
* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify
products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please
check with your Yamaha dealer.
NP-31 NP-11
Size/Weight
Dimensions
Width 1,244mm (49") 1,036mm (40 - 13/16")
Height 105mm (4 - 1/8") 105mm (4 - 1/8")
Depth 259mm (10 - 3/16") 259mm (10 - 3/16")
Weight 5.7kg 4.5kg
Keyboard
Number of Keys 76 (E0 – G6) 61 (C1 – C6)
Type Box Type (Graded SoftTouch) Box Type
Touch Response Hard, Medium, Soft, Fixed Hard, Medium, Soft, Fixed
Panel Language English English
Voices
Tone Generation
Tone Generating
Technology
AWM Stereo Sampling AWM Stereo Sampling
Polyphony
Number of
Polyphony (Max.)
32 32
Preset
Number of
Voices
10 10
Effects
Types Reverb 4 types 4 types
Function Dual Yes Yes
Functions
Demo 10 Voice Demos / 10 Piano Repertoire 10 Voice Demos / 10 Piano Repertoire
Overall Controls
Metronome Yes Yes
Te mp o Ye s Yes
Transpose Yes Yes
Tuning Yes Yes
Connectivity Connectivity
DC/IN 12V 12V
Headphones PHONES/OUTPUT PHONES/OUTPUT
Sustain Pedal* Yes (Half-Damper compatible) Yes (Half-Damper compatible)
MIDI IN/OUT IN/OUT
Amplifiers and
Speakers
Amplifiers 6W × 2 2.5W × 2
Speakers (12cm × 6cm) × 2 (12cm × 6cm) × 2
Power Supply
Power Supply
• Adaptor: Users within U.S or Europe:
PA-150 or an equivalent
Others: PA-5D, PA-150 or an
equivalent
• Adaptor: Users within U.S or Europe:
PA-130 or an equivalent
Others: PA-3C, PA-130 or an
equivalent
• Batteries: Six AA size, LR-6 or equivalent • Batteries: Six AA size, LR-6 or equivalent
Power Consumption 14W 7W
Included Accessories
• Owners Manual
• Quick Operation Guide
• Adaptor: PA-150 or an equivalent
* May not be included depending on your
particular area.
Please check with your Yamaha dealer.
•Music Rest
• My Yamaha Product User Registration
• Owners Manual
• Quick Operation Guide
• Adaptor: PA-130 or an equivalent
* May not be included depending on your
particular area.
Please check with your Yamaha dealer.
•Music Rest
• My Yamaha Product User Registration
Appendix
NP-31/NP-11 Owner’s Manual
23
Index
A
Accessories ...................................................................4
Auto Power Off function .......................................8, 18
B
BEAT [<][>] button .............................................9, 14
C
Combining Voices (Dual) ..........................................11
D
DC IN 12V ....................................................................7
Default setting .............................................................14
[DEMO] button ...............................9, 12, 13, 17, 18, 20
Dual ............................................................................. 11
F
Foot Pedal ............................................................... 8, 21
Foot Switch .............................................................8, 21
H
Headphone .................................................................... 8
Hz .................................................................................17
M
[MASTER VOLUME] dial ...............................8, 9, 10
Metronome ..................................................................14
[METRONOME ON/OFF] button 9, 14, 15, 17, 18, 20
MIDI ............................................................................19
MIDI Data Format ......................................................19
MIDI functions ........................................................... 20
MIDI Implementation chart .........................................4
MIDI [IN] [OUT] .......................................................19
MIDI Reference ......................................................4, 20
MIDI terminals ........................................................... 19
Music Rest ....................................................................8
O
Optional equipment ....................................................21
P
Panel Controls and Terminals ......................................9
Pedal ..............................................................................8
[PHONES/OUTPUT] jack .......................................... 8
Piano Preset Songs .....................................................13
Power requirements ......................................................7
Precautions ....................................................................5
R
Reverb ......................................................................... 16
S
Setting Control Change ON/OFF ............................. 20
Setting Local Control ON/OFF ................................. 20
Setting Program Change ON/OFF ............................ 20
Setting the MIDI Transmit/Receive
Channel Selection
................................................... 20
Song ............................................................................. 13
Specifications ............................................................. 22
[STANDBY/ON] switch .............................................. 8
Start/stop playback ..................................................... 13
[SUSTAIN] Jack .......................................................... 8
T
Table of Contents ......................................................... 3
TEMPO ....................................................................... 14
TEMPO [t][s] button ......................................... 9, 14
Time Signature ........................................................... 14
Touch Sensitivity ........................................................ 18
Transpose .................................................................... 17
Troubleshooting .......................................................... 21
Tuning ......................................................................... 17
V
[VARIATION] button .................... 9, 10, 11, 12, 16, 18
Vo i c e ............................................................................ 10
Voice button .................................................... 10, 11, 12
Voice Demo Songs ..................................................... 12
Vo l u m e .......................................................................... 8
24
25
26
LIMITED 1-YEAR WARRANTY ON
PORTABLE KEYBOARDS
(NP, NPV, PSRE, YPG AND YPT SERIES)
Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free
performance. Yamaha Corporation of America (“Yamaha”) is proud of the experience and craftsmanship that goes into each and every
Yamaha product. Yamaha sells its products through a network of reputable, specially authorized dealers and is pleased to offer you, the
Original Owner, the following Limited Warranty, which applies only to products that have been (1) directly purchased from Yamaha’s
authorized dealers in the fifty states of the USA and District of Columbia (the “Warranted Area”) and (2) used exclusively in the Warranted
Area. Yamaha suggests that you read the Limited Warranty thoroughly, and invites you to contact your authorized Yamaha dealer or
Yamaha Customer Service if you have any questions.
Coverage: Yamaha will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or
otherwise fails to conform with this warranty under normal use and service during the term of this warranty, without charge for labor or
materials. Repairs may be performed using new or refurbished parts that meet or exceed Yamaha specifications for new parts. If
Yamaha elects to replace the product, the replacement may be a reconditioned unit. You will be responsible for any installation or
removal charges and for any initial shipping charges if the product(s) must be shipped for warranty service. However, Yamaha will pay
the return shipping charges to any destination within the USA if the repairs are covered by the warranty. This warranty does not cover (a)
damage, deterioration or malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation or failure to
follow instructions according to the Owner’s Manual for this product; any shipment of the product (claims must be presented to the
carrier); repair or attempted repair by anyone other than Yamaha or an authorized Yamaha Service Center; (b) any unit which has been
altered or on which the serial number has been defaced, modified or removed; (c) normal wear and any periodic maintenance; (d)
deterioration due to perspiration, corrosive atmosphere or other external causes such as extremes in temperature or humidity; (e)
damages attributable to power line surge or related electrical abnormalities, lightning damage or acts of God; or (f) RFI/EMI (Interference/
noise) caused by improper grounding or the improper use of either certified or uncertified equipment, if applicable. Any evidence of
alteration, erasing or forgery of proof-of-purchase documents will cause this warranty to be void. This warranty covers only the Original
Owner and is not transferable.
In Order to Obtain Warranty Service: Warranty service will only be provided for defective products within the Warranted
Area. Contact your local authorized Yamaha dealer who will advise you of the procedures to be followed. If this is not successful, contact
Yamaha at the address, telephone number or website shown below. Yamaha may request that you send the defective product to a local
authorized Yamaha Servicer or authorize return of the defective product to Yamaha for repair. If you are uncertain as to whether a dealer
has been authorized by Yamaha, please contact Yamaha’s Service Department at the number shown below, or check Yamaha’s website
at www.Yamaha.com
. Product(s) shipped for service should be packed securely and must be accompanied by a detailed explanation of
the problem(s) requiring service, together with the original or a machine reproduction of the bill of sale or other dated, proof-of-purchase
document describing the product, as evidence of warranty coverage. Should any product submitted for warranty service be found
ineligible therefore, an estimate of repair cost will be furnished and the repair will be accomplished only if requested by you and upon
receipt of payment or acceptable arrangement for payment.
Limitation of Implied Warranties and Exclusion of Damages: ANY IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE
APPLICABLE PERIOD OF TIME SET FORTH ABOVE. YAMAHA SHALL NOT BE RESPONSIBLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER
EQUIPMENT OR OTHER ITEMS AT THE SITE OF USE OR INTERRUPTION OF PERFORMANCES OR ANY CONSEQUENCES.
YAMAHA’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT
YAMAHA’S OPTION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. This is the only express warranty applicable to the product specified herein; Yamaha neither assumes nor authorizes anyone to
assume for it any other express warranty.
If you have any questions about service received or if you need assistance in locating an authorized Yamaha Servicer, please contact:
CUSTOMER SERVICE
Yamaha Corporation of America
6600 Orangethorpe Avenue, Buena Park, California 90620-1373
Telephone: 800-854-1569
www.yamaha.com
Do not return any product to the above address without a written Return Authorization issued by YAMAHA.
©2009 Yamaha Corporation of America.
(US only)
27
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den
ar ansluten till vägguttaget, även om själva apparaten har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt,
sålænge netledningen sidder i en stikkontakt, som er tændt — også
selvom der er slukket på apparatets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko
laitetta verkosta.
(standby)
Entsorgung leerer Batterien (nur innerhalb
Deutschlands)
Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien
oder Akkumulatoren dürfen nicht in den Hausmüll. Sie können bei
einer Sammelstelle für Altbatterien bzw. Sondermüll abgegeben
werden. Informieren Sie sich bei Ihrer Kommune.
(battery)
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should
not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with
your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human
health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or
the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the
correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical
involved.
(weee_battery_eu_en)
U.R.G., Digital Musical Instruments Division
© 2011 Yamaha Corporation
103POTY*.*-01A0
Printed in China
WW01380
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.
HEAD OFFICE
Yamaha Corporation, Digital Musical Instruments Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650
Tel: +81-53-460-3273
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
Tel: 714-522-9011
MEXICO
Yamaha de México S.A. de C.V.
Calz. Javier Rojo Gómez #1149,
Col. Guadalupe del Moral
C.P. 09300, México, D.F., México
Tel: 55-5804-0600
BRAZIL
Yamaha Musical do Brasil Ltda.
Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi,
CEP 04534-013 Sao Paulo, SP. BRAZIL
Tel: 011-3704-1377
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Olga Cossettini 1553, Piso 4 Norte
Madero Este-C1107CEK
Buenos Aires, Argentina
Tel: 011-4119-7000
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanización Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, Panamá
Tel: +507-269-5311
THE UNITED KINGDOM/IRELAND
Yamaha Music U.K. Ltd.
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, England
Tel: 01908-366700
GERMANY
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Europe GmbH
Branch Switzerland in Zürich
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 01-383 3990
AUSTRIA
Yamaha Music Europe GmbH Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
CZECH REPUBLIC/SLOVAKIA/
HUNGARY/SLOVENIA
Yamaha Music Europe GmbH Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-602039025
POLAND/LITHUANIA/LATVIA/ESTO-
NIA
Yamaha Music Europe GmbH
Branch Sp.z o.o. Oddzial w Polsce
ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland
Tel: 022-500-2925
THE NETHERLANDS/
BELGIUM/LUXEMBOURG
Yamaha Music Europe Branch Benelux
Clarissenhof 5-b, 4133 AB Vianen, The Netherlands
Tel: 0347-358 040
FRANCE
Yamaha Musique France
BP 70-77312 Marne-la-Vallée Cedex 2, France
Tel: 01-64-61-4000
ITALY
Yamaha Musica Italia S.P.A.
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha Música Ibérica, S.A.
Ctra. de la Coruna km. 17, 200, 28230
Las Rozas (Madrid), Spain
Tel: 91-639-8888
GREECE
Philippos Nakas S.A. The Music House
147 Skiathou Street, 112-55 Athens, Greece
Tel: 01-228 2160
SWEDEN
Yamaha Scandinavia AB
J. A. Wettergrens Gata 1, Box 30053
S-400 43 Göteborg, Sweden
Tel: 031 89 34 00
DENMARK
YS Copenhagen Liaison Ofce
Generatorvej 6A, DK-2730 Herlev, Denmark
Tel: 44 92 49 00
FINLAND
F-Musiikki Oy
Kluuvikatu 6, P.O. Box 260,
SF-00101 Helsinki, Finland
Tel: 09 618511
NORWAY
Norsk lial av Yamaha Scandinavia AB
Grini Næringspark 1, N-1345 Østerås, Norway
Tel: 67 16 77 70
ICELAND
Skifan HF
Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland
Tel: 525 5000
RUSSIA
Yamaha Music (Russia)
Room 37, bld. 7, Kievskaya street, Moscow,
121059, Russia
Tel: 495 626 5005
OTHER EUROPEAN COUNTRIES
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
Yamaha Corporation,
Asia-Pacic Sales & Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2317
TURKEY/CYPRUS
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Yamaha Music Gulf FZE
LOB 16-513, P.O.Box 17328
, Jubel Ali,
Dubai, United Arab Emirates
Tel: +971-4-881-5868
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
Tel: 021-6247-2211
HONG KONG
Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: 2737-7688
INDIA
Yamaha Music India Pvt. Ltd.
5F Ambience Corporate Tower Ambience Mall Complex
Ambience Island, NH-8, Gurgaon-122001, Haryana, India
Tel: 0124-466-5551
INDONESIA
PT. Yamaha Musik Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 021-520-2577
KOREA
Yamaha Music Korea Ltd.
8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,
Kangnam-Gu, Seoul, Korea
Tel: 02-3467-3300
MALAYSIA
Yamaha Music (Malaysia) Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
Tel: 03-78030900
PHILIPPINES
Yupangco Music Corporation
339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,
Makati, Metro Manila, Philippines
Tel: 819-7551
SINGAPORE
Yamaha Music (Asia) Pte., Ltd.
#03-11 A-Z Building
140 Paya Lebor Road, Singapore 409015
Tel: 6747-4374
TAIWAN
Yamaha KHS Music Co., Ltd.
3F, #6, Sec.2, Nan Jing E. Rd. Taipei.
Taiwan 104, R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
4, 6, 15 and 16th oor, Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: 02-215-2622
OTHER ASIAN COUNTRIES
Yamaha Corporation,
Asia-Pacic Sales & Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2317
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
NEW ZEALAND
Music Works LTD
P.O.BOX 6246 Wellesley, Auckland 4680,
New Zealand
Tel: 9-634-0099
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yamaha Corporation,
Asia-Pacic Sales & Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2317
NORTH AMERICA
CENTRAL & SOUTH AMERICA
EUROPE
AFRICA
MIDDLE EAST
ASIA
OCEANIA
EKB54
Yamaha Global Home
http://www.yamaha.com/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/

Documenttranscriptie

Owner’s Manual EN SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. Some Yamaha products may have benches and / or accessory mounting fixtures that are either supplied with the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. This product may also use “household” type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, never mix old batteries with new ones, and never mix different types of batteries. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly. NAME PLATE LOCATION: The name plate is located on the bottom of the product. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. Model NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: 92-BP (bottom) Serial No. Purchase Date PLEASE KEEP THIS MANUAL FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. 2 NP-31/NP-11 Owner’s Manual not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. (class B) Table of Contents About the Manuals................................................ 4 Accessories .......................................................... 4 PRECAUTIONS.................................................... 5 Introduction Setting Up 7 Power Requirements ............................................ 7 Connecting Headphones or an Audio Device (PHONES/OUTPUT Jack) ............................... 8 Connecting a Footswitch or a Foot Pedal (SUSTAIN Jack) .............................................. 8 Turning the Power On .......................................... 8 Auto Power Off Function ...................................... 8 Using the Music Rest............................................ 8 Panel Controls and Terminals MIDI Functions 20 Troubleshooting 21 Optional Equipment 21 Appendix Specifications 22 Index 23 9 Reference Selecting & Playing Voices 10 Selecting Voices ................................................. 10 Combining Voices (Dual).................................... 11 Listening to the Voice Demo Songs 12 Listening to the Piano Demo Songs 13 Using the Metronome 14 Other Settings 16 Adding Variations to the Sound – Reverb .......... 16 Transposing the Pitch......................................... 17 Fine Tuning of the Pitch...................................... 17 Touch Sensitivity ................................................ 18 Disabling the Auto Power Off Function............... 18 Connecting MIDI Instruments 19 Connecting to the MIDI [IN] [OUT] terminals ...... 19 MIDI Capabilities ................................................ 19 NP-31/NP-11 Owner’s Manual 3 Thank you for purchasing the Yamaha digital keyboard! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the instrument. We also recommend that you keep this manual in a safe and handy place for future reference. About the Manuals This instrument has the following documents and instructional materials.  Included Documents Owner’s Manual (this book) This Owner’s Manual describes how to use the functions of the instrument. Before using the instrument, be sure to read the Precautions on pages 5 – 6. Quick Operation Guide This Quick Operation Guide shows and explains in chart form the operation of the functions assigned to the buttons and the keyboard for quick and easy understanding.  Online Materials (downloadable from the web) The following instructional materials are available for downloading from the Yamaha website. Yamaha Manual Library http://www.yamaha.co.jp/manual/ Access the Yamaha Manual Library, then enter your model name (NP-31, for example) in the Model Name area to search for a specific manual. MIDI Reference This contains the MIDI Data Format, the MIDI Implementation chart and detailed explanations about the MIDI settings of the instrument. MIDI Basics (only in English, French, German and Spanish) If you want to know more about MIDI and how to use it, refer to this introductory book. Accessories • Owner’s Manual • Quick Operation Guide • Music Rest • AC Power Adaptor * May not be included depending on your particular area. Please check with your Yamaha dealer. • My Yamaha Product User Registration * The PRODUCT ID on the sheet will be needed when you fill out the User Registration form. 4 NP-31/NP-11 Owner’s Manual PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, shortcircuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/AC power adaptor Battery • Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. • Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. • Use the specified adaptor (page 22) only. Using the wrong adaptor can result in damage to the instrument or overheating. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. Do not open • This instrument contains no user-serviceable parts. Do not open the instrument or attempt to disassemble or modify the internal components in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. Water warning • Do not expose the instrument to rain, use it near water or in damp or wet conditions, place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. • Never insert or remove an electric plug with wet hands. Fire warning • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. • Always replace all batteries at the same time. Do not use new batteries together with old ones. • Do not mix battery types, such as alkaline batteries with manganese batteries, or batteries from different makers, or different types of batteries from the same maker, since this can cause overheating, fire, or battery fluid leakage. • Do not tamper with or disassemble batteries. • Do not dispose of batteries in fire. • Do not attempt to recharge batteries that are not intended to be charged. • Keep batteries away from children. • If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor. Battery fluid is corrosive and may possibly cause loss of sight or chemical burns. • Always make sure all batteries are inserted in conformity with the +/- polarity markings. Failure to do so might result in overheating, fire, or battery fluid leakage. • When the batteries run out, or if the instrument is not to be used for a long time, remove the batteries from the instrument to prevent possible leakage of the battery fluid. If you notice any abnormality • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. (If you are using batteries, remove all batteries from the instrument.) Then have the device inspected by Yamaha service personnel. • The power cord or plug becomes frayed or damaged. • It emits unusual smells or smoke. • Some object has been dropped into the instrument. • There is a sudden loss of sound during use of the instrument. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/AC power adaptor Connections • Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. • When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. • Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Handling caution Location • Do not place the instrument in an unstable position where it might accidentally fall over. • Before moving the instrument, remove all connected cables. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. • Use only the stand specified for the instrument. When attaching the stand or rack, use the provided screws only. Failure to do so could cause damage to the internal components or result in the instrument falling over. DMI-3 • Do not insert a finger or hand in any gaps on the instrument. • Never insert or drop paper, metallic, or other objects into the gaps on the panel or keyboard. This could cause physical injury to you or others, damage to the instrument or other property, or operational failure. • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. 1/2 NP-31/NP-11 Owner’s Manual 5 Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. Even when the power switch is in standby status, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet. Make sure to discard used batteries according to local regulations. NOTICE To avoid the possibility of malfunction/damage to the product, or damage to other property, follow the notices below.  Handling and Maintenance • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. • Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.) • Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. • Since speakers are built into the instrument you should be careful to never leave any video tapes, cassette tapes, floppy disks or any kind of magnetic storage media on the panel—doing so may result in data loss or damage to the items. Information  About copyrights • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others' copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.  About functions/data bundled with the instrument • Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.  About this manual • The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. The serial number of this product may be found on the bottom of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. (bottom) DMI-3 6 NP-31/NP-11 Owner’s Manual 2/2 Setting Up Be sure to do the following operations BEFORE turning on the power. Introduction Power Requirements Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete resources. Using an AC Power Adaptor 1 Make sure that the [ ] (Standby/On) switch of the instrument is off (the power indicator located to the left of the switch is off). WARNING • Use the specified adaptor (page 22). The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. 2 Connect the AC adaptor to the power supply jack. 3 Plug the AC adaptor into an AC outlet. CAUTION • Unplug the AC Power Adaptor when not using the instrument, or during electrical storms. 2 AC power adaptor 3 AC outlet Using Batteries 1 Open the battery compartment cover located on the instrument’s bottom panel. 2 Insert six new alkaline batteries, being careful to follow the polarity markings on the side of the compartment. 3 Replace the compartment cover, making sure that it locks firmly in place. NOTE • Never connect or disconnect the AC power adaptor when the power is on and the batteries are installed. Doing so will turn the power off. For battery operation, the instrument requires six 1.5V “AA” size, LR6 or equivalent batteries. (Alkaline batteries are recommended.) When battery power becomes too low for proper operation, the volume may be reduced, the sound may be distorted, and other problems may occur. When this happens, make sure to replace all batteries, following the precautions listed below. WARNING • Make sure to install the batteries with the proper orientation, maintaining the correct polarity (as shown). Incorrect battery installation may result in heat, fire and/or leaking of corrosive chemicals. • When the batteries run down, replace them with a complete set of six new batteries. NEVER mix old and new batteries. Do not use different kinds of batteries (e.g. alkaline and manganese) at the same time. • If the instrument is not to be used for a long time, remove the batteries in order to prevent possible fluid leakage and damage to the instrument. NP-31/NP-11 Owner’s Manual 7 Setting Up Make sure to properly connect all external devices you are using (as shown below) BEFORE turning the power on. Connecting Headphones or an Audio Device (PHONES/OUTPUT Jack) NOTE • Make sure that the power is OFF when connecting or disconnecting the Footswitch or the Foot Pedal. • Do not turn the power on while pressing the Footswitch or the Foot Pedal. Otherwise, the switch or pedal type (on/off) will be reversed. Turning the Power On A pair of stereo headphones with a 1/4" stereo phone plug can be plugged in the PHONES/OUTPUT jack for convenient monitoring. The speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output. You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument’s output signal to that device. CAUTION • Avoid listening with the headphones at high volume for long periods of time; doing so may not only result in ear fatigue, it may be damaging to your hearing. CAUTION • To prevent damage to the speakers, set the volume of the external devices at the minimum setting before connecting them. Failure to observe these cautions may result in electric shock or equipment damage. Also, be sure to set the volumes of all devices at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Connecting a Footswitch or a Foot Pedal (SUSTAIN Jack) The SUSTAIN jack is for connecting the Footswitch or foot pedal. The pedal functions in the same way as a damper pedal on an acoustic piano. Connect an optional footswitch FC4/FC5 to this jack and press the pedal to sustain the sound. An optional FC3 Foot Pedal can also be connected to this jack. If you connect an optional FC3 Foot Pedal, the half pedal function* can be used. * Half pedal function If you are playing the piano with sustain but want to make the sound between notes clearer, slightly release your foot from the pedal, keeping the pedal down in half position or less. 8 NP-31/NP-11 Owner’s Manual Turn down the volume by turning the [MASTER VOLUME] dial to the MIN position and press the [ ] (Standby/On) switch to turn on the power. Press the [ ] (Standby/On) switch again for a second to turn the power to standby. While playing the keyboard, adjust the volume level by using the [MASTER VOLUME] dial. CAUTION • Even when the switch is set to standby, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC outlet, and/ or remove the batteries from the instrument. NOTE • All panel settings are reset to the default values whenever the power is turned off. Auto Power Off Function To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not operated for 30 minutes. The Auto Power Off function can be set to on or off; see page 18. Using the Music Rest The instrument includes a music rest that can be attached to the instrument by inserting it into the slot at the top of the control panel. Panel Controls and Terminals !0 !1 i Shows the jacks and terminals as seen when viewed from the rear of the instrument. C1 Shows the jacks and terminals as seen when viewed from the rear of the instrument. C2 C3 C4 C5 w e C6 (The illustration shows the NP-31) NP-11 q o r t u y q [MASTER VOLUME] dial ........................ page 8 For adjusting the volume level of the entire sound. w[ ] (Standby/On) switch ....................... page 8 For turning the power on or off. e [DEMO] button...............................pages 12, 13 For playing all the Voice Demo Songs and Piano Demo Songs. r [METRONOME ON/OFF] button ...........page 14 For using the metronome. t VOICE buttons ............................... pages 10, 11 For selecting the Voices (instrument sounds), such as Grand Piano. y TEMPO [t] [s]/BEAT [<] [>] buttons ................................................................page 14 u [VARIATION] button ..............................page 10 For selecting a different Voice for the Voice button. i [SUSTAIN] jack ........................................page 8 For connecting a pedal, optional FC3 Foot Pedal or FC4/FC5 Footswitch. o MIDI [IN] [OUT] terminals .....................page 19 For connecting external MIDI devices, allowing the use of various MIDI functions. !0 [PHONES/OUTPUT] jack ........................page 8 For connecting a set of standard stereo headphones, allowing private practice. This jack also functions as an external output. !1 DC IN jack ................................................page 7 For connecting the power adaptor. The tempo and beat of the metronome can be changed by using these buttons while holding the [METRONOME ON/OFF] button. The TEMPO buttons also affect the tempo of the Demo Song. NP-31/NP-11 Owner’s Manual 9 Selecting & Playing Voices Reference Selecting Voices 1 Press one of the Voice buttons. NOTE To familiarize yourself with the characteristics of the Voices, listen to the Voice Demo Songs for each Voice (page 12). Two different Voices are assigned to each Voice button. You can switch between them by pressing the [VARIATION] button. After the [Grand Piano] is pressed, for example, turning on [VARIATION] will call up the Grand Piano 2 Voice while turning off [VARIATION] will call up the Grand Piano 1 Voice. Voice Button 10 Description Grand Piano 1 Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano. VARIATION Grand Piano 2 Clear piano with bright reverb. Good for popular music. E.PIANO E. Piano 1 An electronic piano sound created by FM synthesis. Good for popular music. VARIATION E. Piano 2 The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when played lightly, and an aggressive tone when played hard. PIPE ORGAN Pipe Organ 1 This is a typical pipe organ sound (8' + 4' + 2'). Good for sacred music from the Baroque period. VARIATION Pipe Organ 2 This is the organ’s full coupler sound, often associated with Bach’s “Toccata and Fugue.” Strings Spacious and large-scale string ensemble. Try combining this Voice with piano in DUAL. VARIATION Vibraphone The sound of a vibraphone played with relatively soft mallets. HARPSICHORD Harpsichord 1 The definitive instrument for baroque music. Since the strings of a harpsichord are plucked, there is no touch response. VARIATION Harpsichord 2 Mixes the same Voice an octave higher for a more brilliant, dynamic tone. STRINGS/ VIBES 2 Voice Name GRAND PIANO Adjust the volume. Rotate the [MASTER VOLUME] dial to set the most comfortable listening level during your performance. NP-31/NP-11 Owner’s Manual TERMINOLOGY Voice: The term “Voice” refers to a musical instrument sound built into the Digital Musical Instrument. NOTE When you select a Voice, an appropriate reverb type will be selected automatically (page 16). Selecting & Playing Voices Combining Voices (Dual) You can play Voices simultaneously across the entire range of the keyboard. In this way, you can combine similar Voices to create a thicker sound. 1 Press two Voice buttons simultaneously to engage Dual. NOTE Dual mode cannot be used with two Voices of the single Voice button (for example, strings and vibraphone). NOTE The Voice assigned to the left side button will be designated as Voice 1, and the Voice assigned to the right side button will be designated as Voice 2. Using Variation Voices in Dual mode To select a Variation Voice in Dual mode, first select the desired Voice, then press the [VARIATION] button. Finally, press the two desired Voice buttons simultaneously. If either of the Voices is a Variation Voice, the [VARIATION] indicator lights. To use (or cancel) Variation for both Voices, simply press the [VARIATION] button so that the indicator lights (or goes off). 2 Reverb in Dual The reverb type assigned to Voice 1 will take priority. If the reverb assigned to Voice 1 is set to OFF, the reverb assigned to Voice 2 will be in effect. NOTE Refer to “Selecting Voices” on page 10 for more information on the Voices that are assigned to the [VARIATION] button. To exit from Dual, press one of the Voice buttons. Setting the Octave While holding down the [VARIATION] button, press one of the C4 – D4 keys to shift the pitch up or down in octave steps for Voice 1. While holding down the [VARIATION] button, press one of the D#4 – F4 keys to shift the pitch up or down in octave steps for Voice 2. NP-31 Voice 1 Voice 2 C4 Voice 1 C4 -1 C#4 0 D4 +1 Voice 2 NP-11 F4 C5 C6 D#4 -1 E4 0 F4 +1 Setting the Volume Balance While hold down the [VARIATION] button, press one of the F#4 – F#5 keys (see the illustration) to adjust the volume balance between two Voices. A setting of “0” produces equal balance between Voices 1 and 2. Values below “0” (to “-6”) decrease the volume of Voice 1 and increase the volume of Voice 2; values above “0” (to “6”) increase the volume of Voice 1 and decrease the volume of Voice 2. NP-31 NP-11 F#4 (-6) C4 C5 (0) F#5 (+6) C6 NP-31/NP-11 Owner’s Manual 11 Listening to the Voice Demo Songs The instrument features special Voice Demo Songs that effectively showcase each of the Voices. 1 While holding down the [DEMO] button, press one of the Voice buttons to start the Voice Demo Song. The Songs provided for each Voice will play back in sequence. NOTE Refer to the Voice list on page 10 for more information on the characteristics of each preset Voice. NOTE The Voice Demo Songs are not transmitted via MIDI. NOTE Simply pressing the [DEMO] button starts the Demo Song sequence from the Grand Piano 1 Voice. NOTE The [VARIATION] indicator is lit while the Demo Song of the Variation Voice is playing back. Changing a Voice Demo Song During playback, you can change the Voice Demo Song by pressing a different Voice button. In addition, you can select a different Voice Demo Song for the Variation Voice by pressing the [VARIATION] button. The Voice Demo Song List Voice Name Title Composer Harpsichord 1 Gavotte J.S. Bach Harpsichord 2 Invention No. 1 J.S. Bach The demonstration pieces listed above are short rearranged excerpts of the original compositions. All other songs are original (© 2011 Yamaha Corporation). 2 12 Press the [DEMO] button to stop playback. NP-31/NP-11 Owner’s Manual NOTE You can adjust the tempo of the Voice Demo Song during playback. For instructions on setting the tempo, see page 14. Listening to the Piano Demo Songs The instrument provides Piano Demo Songs as well as Voice Demo Songs, for your listening pleasure. 1 While holding down the [DEMO] button, press one of the 1 – 10 (C#1 – A#1) keys to start the desired Song. The Piano Demo Songs are assigned to the 1 – 10 (C#1 – A#1) keys. The selected Piano Preset Song will play back followed by the rest of the Songs in sequence. NP-31 NP-11 C#1 A#1 NOTE You can play the keyboard along with the Piano Demo Song. You can also change the Voice for playing on the keyboard. NOTE When you select a different Song (or a different Song is selected during chained playback), an appropriate reverb type will be selected accordingly. NOTE C1 You can adjust the tempo of the Piano Demo Song during playback. For instructions on setting the tempo, see page 14. C2 C#1 A#1 Piano Demo Song List NOTE NP-31 No. 1 2 3 4 5 6 7 8 9 10 Title Menuett G dur BWV.Anh.114 Turkish March (Piano Sonate No.11 K.331) Für Elise Valse op.64-1 “Petit chien” Träumerei Dolly’s Dreaming and Awakening Arabesque Humoresque The Entertainer La Fille aux Cheveux de Lin Composer J.S. Bach W.A. Mozart L.v. Beethoven F.F. Chopin R. Schumann T. Oesten J.F.F. Burgmüller A. Dvořák S. Joplin C.A. Debussy Title Invention No. 1 Prelude (Wohltemperierte Klavier I No.1) Le Coucou Turkish March Little Serenade Ecossaise Moments Musicaux op.94-3 Valse op.69-1 “L’adieu” Fröhlicher Landmann La chevaleresque Composer J.S. Bach J.S. Bach L-C. Daquin W.A. Mozart J. Haydn L.v. Beethoven F.P. Schubert F.F. Chopin R. Schumann J.F. Burgmüller The Piano Demo Songs are not transmitted via MIDI. NP-11 No. 1 2 3 4 5 6 7 8 9 10 2 Press the [DEMO] button to stop playback. NP-31/NP-11 Owner’s Manual 13 Using the Metronome This instrument features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing. 1 Press the [METRONOME ON/OFF] button to start the Metronome. 2 Press the [METRONOME ON/OFF] button to stop the Metronome. Setting the Beat While holding down the [METRONOME ON/OFF] button, use the BEAT [<] button or the BEAT [>] button to select the Beat from 0, 2, 3, 4, 5 and 6. The first Beat is accented with a bell sound and the rest with clicks. The default setting is 0. In this setting, clicks sound for all beats. The beat can also be changed by the following operation. While holding down the [METRONOME ON/OFF] button, press one of the keys C3 – F3. NP-31 NP-11 C1 C2 C3 TERMINOLOGY Default setting: The “Default setting” refers to the factory setting obtained when you first turn on the power to the instrument. Key Beat C3 0 C#3 2 D3 3 D#3 4 E3 5 F3 6 F3 Adjusting the Tempo While holding down the [METRONOME ON/OFF] button, use the TEMPO [t] or [s] button to decrease or increase in single steps. NOTE Setting range: q = 32 – 280 NOTE Default setting: 120 While holding down the [METRONOME ON/OFF] button, press both TEMPO [t]/[s] buttons simultaneously to restore the default tempo. 14 NP-31/NP-11 Owner’s Manual Using the Metronome Also, while holding down the [METRONOME ON/OFF] button, use the following keys to increase or decrease in single or ten steps. Increasing the tempo value in steps of one: While holding down the [METRONOME ON/OFF] button, press the F#2 key. Decreasing the tempo value in steps of one: While holding down the [METRONOME ON/OFF] button, press the E2 key. Increasing the tempo value in steps of ten: While holding down the [METRONOME ON/OFF] button, press the G2 key. Decreasing the tempo value in steps of ten: While holding down the [METRONOME ON/OFF] button, press the D#2 key. Resetting the tempo to default: While holding down the [METRONOME ON/OFF] button, press the F2 key. D#2 (-10) F#2 (+1) NP-31 NP-11 C2 E2 (-1) G2 (+10) F2 (default) C1 C3 Entering a specific tempo number The numbers 0 – 9 are assigned to the keys C1 – A1, respectively (see below). While holding down the [METRONOME ON/OFF] button, press the appropriate 0 (C1) – 9 (A1) keys in sequence to specify a two or three-digit number. Select a number starting from the left-most digit. For example, to set the tempo to “95,” press the 9 (A1) and 5 (F1) keys in sequence. NP-31 NP-11 C1 A1 C2 C1 A1 Adjusting the volume You can change the volume of the metronome sound. While holding down the [METRONOME ON/OFF] button, press one of the C4 – G5 keys to determine the volume. Pressing a higher key results in a higher volume, while pressing a lower key results in a lower volume. NOTE Setting range: C4 (1) – G5 (20) Default setting: A4 (10) NP-31 NP-11 C4 (1) C5 G5 (20) C6 NP-31/NP-11 Owner’s Manual 15 Other Settings Adding Variations to the Sound – Reverb This control enables you to select four different types of reverb effect that add extra depth and expression to the sound to create a realistic acoustic ambience. Key Reverb Type Description C2 Room This setting adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room. C#2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a small-size concert hall. D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect sim-ulates the natural reverberation of a large concert hall. D#2 Stage Simulates the reverb of a stage environment. E2 Off No effect is applied. Selecting a Reverb Type While holding down the [VARIATION] button, press one of the C2 – E2 keys to select a reverb type (as shown above). NP-31 NOTE The appropriate Reverb Type and Depth are automatically set when a Voice is selected. NP-11 C1 C2 E2 Adjusting Reverb Depth While holding down the [VARIATION] button, press one of the C1 – A#1 keys to adjust the reverb depth for the selected Voice. NP-31 NP-11 C1 (0) A#1 (10) B1 C2 The depth value increases as you press higher keys. While holding down the [VARIATION] button, press the B1 key to set the reverb to the depth most suitable for the selected Voice. 16 NP-31/NP-11 Owner’s Manual NOTE Setting range: 0 (no effect) – 10 (maximum depth) Other Settings Transposing the Pitch The Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals to facilitate playing in difficult key signatures, and to let you easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if you set the transposition amount to “+5,” playing a C key actually produces a pitch of F. In this way, you can play a song as though it were in C major, and the instrument will transpose it to the key of F. Setting the amount of transposition While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button, then press one of the F#2 – F#3 keys to set the desired amount of transposition. NP-31 F#2 NP-11 C1 C3 F#3 C2 -6 -4 -2 +1 +3 +6 -5 -3 -1 0 +2 +4 +5 To transpose the pitch down (in semitone steps) While holding down the [DEMO] button, press and hold the [METRONOME ON/ OFF] button, then press any key between F#2 and B2. NOTE Setting range: F#2 (-6 semitones) – C3 (normal pitch) – F#3 (+6 semitones) To transpose the pitch up (in semitone steps) While holding down the [DEMO] button, press and hold the [METRONOME ON/ OFF] button, then press any key between C#3 and F#3. To restore the normal pitch While holding down the [DEMO] button, press and hold the [METRONOME ON/ OFF] button, then press the C3 key. Fine Tuning of the Pitch You can fine tune the pitch of the entire instrument. This function is useful when you play the instrument along with other instruments or CD music. Setting the Pitch To lower or raise the pitch (in steps of roughly 1.0 Hz): While holding down the [DEMO] button, press and hold the [METRONOME ON/ OFF] button, then press G3 (to lower) or B3 (to raise). To lower or raise the pitch (in steps of roughly 0.2 Hz): While holding down the [DEMO] button, press and hold the [METRONOME ON/ OFF] button, then press G#3 (to lower) or A#3 (to raise). To restore standard pitch: While holding down the [DEMO] button, press and hold the [METRONOME ON/ OFF] button, then press C3. TERMINOLOGY Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. NOTE Setting range: 427.0 – 453.0 Hz Default setting: A3 = 440Hz. G#3 (-0.2Hz) A#3 (+0.2Hz) NP-31 NP-11 C1 C2 C3 G3 (-1.0Hz) B3 (+1.0Hz) A3 (standard pitch) NP-31/NP-11 Owner’s Manual 17 Other Settings Touch Sensitivity You can adjust the volume level that changes depending on how fast or strong you hit the keys. The following four settings are available. Key Touch Sensitivity Description FIXED The volume level does not change at all regardless of whether you play the keyboard soft or hard. A#5 SOFT The volume level does not change much when you play the keyboard soft or hard. B5 MEDIUM This is the standard piano touch response (default setting). C6 HARD The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic and dramatic expression. You have to hit the keys hard to produce a loud sound. A5 Setting the Touch Sensitivity Type While holding down the [VARIATION] button, press one of the A5 – C6 keys to select the desired touch sensitivity. NP-31 NP-11 NOTE The touch sensitivity settings may have little or no effect with Pipe Organ 1, 2 and Harpsichord 1, 2 Voices that are not normally responsive to keyboard dynamics. NOTE Default setting: Medium A5 C6 Disabling the Auto Power Off Function To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not used—i.e., no buttons or keys are pressed—for approximately 30 minutes. If you do not want to use the Auto Power Off function, change the setting as follows. Turn the power of the instrument off. Then, while holding down the lowest key, press the [ ] (Standby/On) switch to turn on the power again so that the [VARIATION] indicator flashes 3 times, after which the Auto Power Off function is disabled. NP-31 NP-11 If you want to disable the Auto Power Off function without turning the power off, hold down the [DEMO] button, then press and hold the [METRONOME ON/OFF] button, then press the A5 key. Re-enabling the Auto Power Off Function While holding down the [DEMO] button, press and hold the [METRONOME ON/ OFF] button, then press the G#5 key to enable the Auto Power Off function again. NP-31 NP-11 G#5 (enable) A5 (disable) 18 NP-31/NP-11 Owner’s Manual NOTE Default setting: Enable Connecting MIDI Instruments The instrument features MIDI IN/OUT terminals, allowing you to connect the instrument to other instruments and devices—including computers—and take advantage of the various performance and recording capabilities in MIDI applications. Connecting to the MIDI [IN] [OUT] terminals MIDI [IN] [OUT] terminals Use MIDI cables to connect external MIDI devices to these connectors. NOTE About MIDI MIDI (Musical Instrument Digital Interface) is a standard format for data transmission/ reception. It enables the transmission of performance data and commands between MIDI devices and personal computers. Using MIDI, you can control a connected MIDI device from the instrument, or control the instrument from a connected MIDI device or computer. Since MIDI data that can be transmitted or received varies depending on the type of MIDI device, check the chapter “MIDI data format” on page 4 in “MIDI Reference” to find out what MIDI data and commands your devices can transmit or receive. MIDI Capabilities MIDI functions enable you to transmit performance data between MIDI devices. NOTICE NOTE • Before connecting the instrument to other electronic components, turn off the power of all the components. Transmitting performance data to and from another MIDI device MIDI [OUT] terminal MIDI [IN] terminal MIDI cables (optional) MIDI [OUT] terminal MIDI [IN] terminal You cannot transmit the Voice Demo Songs and the Piano Preset Songs from the instrument to another MIDI device. NOTE For MIDI connections, use a standard (optional) MIDI cable, available at most musical instrument stores. NOTE Instrument MIDI device Transmitting performance data to and from a computer MIDI [IN] terminal MIDI [OUT]terminal When the instrument is used as a tone module, performance data with Voices that are not found on the instrument will not be played correctly. USB terminal Computer Instrument USB-MIDI interface (optional) Connecting the USB port on the computer to the instrument via an optional USB-MIDI interface (such as the Yamaha UX16) Use a USB-MIDI interface device to connect the USB port on your computer to the instrument’s MIDI terminals. You must install the USB-MIDI interface (such as the UX16) driver. For more information, refer to the user’s manual that came with the USB-MIDI interface device. NOTE You must install an appropriate software application on the computer to be able to transmit performance data between the instrument and a computer. NOTICE • When connecting the instrument to a computer, first turn off the power to the instrument, and then exit any open applications on the computer before connecting any cables. After making all connections, turn on the power to the instrument. NP-31/NP-11 Owner’s Manual 19 MIDI Functions While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button, then press the appropriate key indicated in the list below to make detailed adjustments to the MIDI settings. Key Setting item Setting value Default Description C1 – E2 Setting the MIDI Transmit Channel 1 – 16, OFF Channel1 This parameter enables you to specify the channel over which the instrument transmits MIDI data. C4 – F5 Setting the MIDI Receive Channel 1 – 16, 1 + 2, ALL ALL This parameter enables you to specify the channel over which the instrument receives MIDI data. A#5 Setting Local Control ON/ OFF ON This parameter enables you to set Local Control to ON or OFF. Local control can be set to OFF so that the instrument does not play the internal Voices, but the appropriate MIDI information is still transmitted via the MIDI OUT terminal when notes are played on the instrument. ON This parameter enables you to set Program Change to ON or OFF. This function makes it possible to cancel program change number reception and transmission so that Voices can be selected on the instrument without affecting the external MIDI device. ON This parameter enables you to set Control Change ON or OFF. This function makes it possible to cancel control change data reception and transmission so that, for example, the pedal of the instrument and other controls can be operated without affecting an external MIDI device. B5 Setting Program Change ON/OFF C6 Setting Control Change ON/OFF ON/OFF ON/OFF ON/OFF For details on the specific keys and the corresponding setting values, please refer to the included “Quick Operation Guide.” Detailed instructions for making MIDI settings are explained in the MIDI Reference document, which can be downloaded from the Yamaha Manual Library on the Internet. (For details, please refer to the section “About the Manuals” on page 4.) 20 NP-31/NP-11 Owner’s Manual Troubleshooting Problem The instrument does not turn on. Possible Cause and Solution The instrument has not been plugged in properly. Securely insert the female plug into the jack on the instrument, and the male plug into a proper AC outlet (page 7). The batteries are low or dead. Replace all six batteries with completely new alkaline ones, or use the optional AC adaptor. Noise is heard from the speakers or headphones. The noise may be due to interference caused by the use of a mobile phone in close proximity to the instrument. Turn off the mobile phone, or use it further away from the instrument. The batteries are low or dead. Replace all six batteries with completely new alkaline ones, or use the optional AC adaptor. The Master Volume is set too low; set it to an appropriate level using the [MASTER VOLUME] dial. The overall volume is low, or no sound is heard. Make sure a pair of headphones is not connected to the headphones jack (page 8). Make sure that Local Control (page 20) is ON. The batteries are low or dead. Replace all six batteries with completely new alkaline ones, or use the optional AC adaptor. The sound is distorted. If you are using manganese batteries with the instrument, try replacing them with a set of new alkaline batteries. Alternately, you could use the AC adaptor instead, or try turning down the volume. The sustain pedal has no effect. The pedal cable/plug may not be properly connected. Make sure to securely insert the pedal plug into the SUSTAIN jack (page 8). The pitch and/or tone of the piano Voices in certain ranges do not sound right. The piano Voices attempt to precisely simulate actual piano sounds. However, as a result of sampling algorithms, overtones in some ranges may sound exaggerated, producing a somewhat different pitch or tone. Power suddenly and unexpectedly turns off. This is normal and the Auto Power Off function may have been activated. If you need to disable the Auto Power Off function, select “Off” in the function settings (page 18). Optional Equipment • • • • • • Headphones (HPE-150/HPE-30) Foot Pedal (FC3) Footswitch (FC4/FC5) Keyboard Stand (L-2C) USB-MIDI interface (UX16 ) AC Power Adaptor: Users within U.S or Europe: PA-150 or an equivalent, Others: PA-5D, PA-150 or an equivalent (for the NP-31) Users within U.S or Europe: PA-130 or an equivalent, Others: PA-3C, PA-130 or an equivalent (for the NP-11) NP-31/NP-11 Owner’s Manual 21 Specifications Appendix NP-31 Width Size/Weight Keyboard Panel Voices Effects Dimensions NP-11 1,036mm (40 - 13/16") Height 105mm (4 - 1/8") 105mm (4 - 1/8") Depth 259mm (10 - 3/16") 259mm (10 - 3/16") Weight 5.7kg 4.5kg Number of Keys 76 (E0 – G6) 61 (C1 – C6) Type Box Type (Graded SoftTouch) Box Type Touch Response Hard, Medium, Soft, Fixed Hard, Medium, Soft, Fixed Language English English Tone Generation Tone Generating Technology AWM Stereo Sampling AWM Stereo Sampling Polyphony Number of Polyphony (Max.) 32  32  Preset Number of Voices 10 10 Types Reverb 4 types 4 types Function Dual Yes Yes 10 Voice Demos / 10 Piano Repertoire 10 Voice Demos / 10 Piano Repertoire Demo Functions 1,244mm (49") Overall Controls Metronome Yes Yes Tempo Yes Yes Transpose Yes Yes Tuning Yes Yes DC/IN 12V 12V Headphones PHONES/OUTPUT PHONES/OUTPUT Sustain Pedal* Yes (Half-Damper compatible) Yes (Half-Damper compatible) MIDI Connectivity Connectivity IN/OUT IN/OUT Amplifiers and Speakers Amplifiers 6W × 2 2.5W × 2 Speakers (12cm × 6cm) × 2 (12cm × 6cm) × 2 • Adaptor: Users within U.S or Europe: PA-150 or an equivalent Others: PA-5D, PA-150 or an equivalent • Adaptor: Users within U.S or Europe: PA-130 or an equivalent Others: PA-3C, PA-130 or an equivalent • Batteries: Six AA size, LR-6 or equivalent • Batteries: Six AA size, LR-6 or equivalent Power Supply Power Supply Power Consumption Included Accessories 14W 7W • Owner’s Manual • Quick Operation Guide • Adaptor: PA-150 or an equivalent * May not be included depending on your particular area. Please check with your Yamaha dealer. • Music Rest • My Yamaha Product User Registration • Owner’s Manual • Quick Operation Guide • Adaptor: PA-130 or an equivalent * May not be included depending on your particular area. Please check with your Yamaha dealer. • Music Rest • My Yamaha Product User Registration * When an optional FC3 Foot Pedal is connected, the half pedal effect can be used. * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. 22 NP-31/NP-11 Owner’s Manual Index A R Accessories ...................................................................4 Auto Power Off function .......................................8, 18 Reverb ......................................................................... 16 B BEAT [<][>] button .............................................9, 14 C Combining Voices (Dual) ..........................................11 D DC IN 12V ....................................................................7 Default setting .............................................................14 [DEMO] button ...............................9, 12, 13, 17, 18, 20 Dual .............................................................................11 F Foot Pedal ...............................................................8, 21 Foot Switch .............................................................8, 21 H Headphone ....................................................................8 Hz .................................................................................17 M [MASTER VOLUME] dial ...............................8, 9, 10 Metronome ..................................................................14 [METRONOME ON/OFF] button 9, 14, 15, 17, 18, 20 MIDI ............................................................................19 MIDI Data Format ......................................................19 MIDI functions ...........................................................20 MIDI Implementation chart .........................................4 MIDI [IN] [OUT] .......................................................19 MIDI Reference ......................................................4, 20 MIDI terminals ...........................................................19 Music Rest ....................................................................8 S Setting Control Change ON/OFF ............................. 20 Setting Local Control ON/OFF ................................. 20 Setting Program Change ON/OFF ............................ 20 Setting the MIDI Transmit/Receive Channel Selection ................................................... 20 Song ............................................................................. 13 Specifications ............................................................. 22 [STANDBY/ON] switch .............................................. 8 Start/stop playback ..................................................... 13 [SUSTAIN] Jack .......................................................... 8 T Table of Contents ......................................................... 3 TEMPO ....................................................................... 14 TEMPO [t][s] button ......................................... 9, 14 Time Signature ........................................................... 14 Touch Sensitivity ........................................................ 18 Transpose .................................................................... 17 Troubleshooting .......................................................... 21 Tuning ......................................................................... 17 V [VARIATION] button .................... 9, 10, 11, 12, 16, 18 Voice ............................................................................ 10 Voice button .................................................... 10, 11, 12 Voice Demo Songs ..................................................... 12 Volume .......................................................................... 8 O Optional equipment ....................................................21 P Panel Controls and Terminals ......................................9 Pedal ..............................................................................8 [PHONES/OUTPUT] jack ..........................................8 Piano Preset Songs ..................................................... 13 Power requirements ......................................................7 Precautions ....................................................................5 NP-31/NP-11 Owner’s Manual 23 24 25 (US only) LIMITED 1-YEAR WARRANTY ON PORTABLE KEYBOARDS (NP, NPV, PSRE, YPG AND YPT SERIES) Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America (“Yamaha”) is proud of the experience and craftsmanship that goes into each and every Yamaha product. Yamaha sells its products through a network of reputable, specially authorized dealers and is pleased to offer you, the Original Owner, the following Limited Warranty, which applies only to products that have been (1) directly purchased from Yamaha’s authorized dealers in the fifty states of the USA and District of Columbia (the “Warranted Area”) and (2) used exclusively in the Warranted Area. Yamaha suggests that you read the Limited Warranty thoroughly, and invites you to contact your authorized Yamaha dealer or Yamaha Customer Service if you have any questions. Coverage: Yamaha will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or otherwise fails to conform with this warranty under normal use and service during the term of this warranty, without charge for labor or materials. Repairs may be performed using new or refurbished parts that meet or exceed Yamaha specifications for new parts. If Yamaha elects to replace the product, the replacement may be a reconditioned unit. You will be responsible for any installation or removal charges and for any initial shipping charges if the product(s) must be shipped for warranty service. However, Yamaha will pay the return shipping charges to any destination within the USA if the repairs are covered by the warranty. This warranty does not cover (a) damage, deterioration or malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation or failure to follow instructions according to the Owner’s Manual for this product; any shipment of the product (claims must be presented to the carrier); repair or attempted repair by anyone other than Yamaha or an authorized Yamaha Service Center; (b) any unit which has been altered or on which the serial number has been defaced, modified or removed; (c) normal wear and any periodic maintenance; (d) deterioration due to perspiration, corrosive atmosphere or other external causes such as extremes in temperature or humidity; (e) damages attributable to power line surge or related electrical abnormalities, lightning damage or acts of God; or (f) RFI/EMI (Interference/ noise) caused by improper grounding or the improper use of either certified or uncertified equipment, if applicable. Any evidence of alteration, erasing or forgery of proof-of-purchase documents will cause this warranty to be void. This warranty covers only the Original Owner and is not transferable. In Order to Obtain Warranty Service: Warranty service will only be provided for defective products within the Warranted Area. Contact your local authorized Yamaha dealer who will advise you of the procedures to be followed. If this is not successful, contact Yamaha at the address, telephone number or website shown below. Yamaha may request that you send the defective product to a local authorized Yamaha Servicer or authorize return of the defective product to Yamaha for repair. If you are uncertain as to whether a dealer has been authorized by Yamaha, please contact Yamaha’s Service Department at the number shown below, or check Yamaha’s website at www.Yamaha.com. Product(s) shipped for service should be packed securely and must be accompanied by a detailed explanation of the problem(s) requiring service, together with the original or a machine reproduction of the bill of sale or other dated, proof-of-purchase document describing the product, as evidence of warranty coverage. Should any product submitted for warranty service be found ineligible therefore, an estimate of repair cost will be furnished and the repair will be accomplished only if requested by you and upon receipt of payment or acceptable arrangement for payment. Limitation of Implied Warranties and Exclusion of Damages: ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE APPLICABLE PERIOD OF TIME SET FORTH ABOVE. YAMAHA SHALL NOT BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF USE OR INTERRUPTION OF PERFORMANCES OR ANY CONSEQUENCES. YAMAHA’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT YAMAHA’S OPTION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only express warranty applicable to the product specified herein; Yamaha neither assumes nor authorizes anyone to assume for it any other express warranty. If you have any questions about service received or if you need assistance in locating an authorized Yamaha Servicer, please contact: CUSTOMER SERVICE Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, California 90620-1373 Telephone: 800-854-1569 www.yamaha.com Do not return any product to the above address without a written Return Authorization issued by YAMAHA. ©2009 Yamaha Corporation of America. 26 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. (weee_battery_eu_en) OBSERVERA! Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av. ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge netledningen sidder i en stikkontakt, som er tændt — også selvom der er slukket på apparatets afbryder. VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta verkosta. (standby) Entsorgung leerer Batterien (nur innerhalb Deutschlands) Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien oder Akkumulatoren dürfen nicht in den Hausmüll. Sie können bei einer Sammelstelle für Altbatterien bzw. Sondermüll abgegeben werden. Informieren Sie sich bei Ihrer Kommune. (battery) 27 For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S.A. de C.V. Calz. Javier Rojo Gómez #1149, Col. Guadalupe del Moral C.P. 09300, México, D.F., México Tel: 55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi, CEP 04534-013 Sao Paulo, SP. BRAZIL Tel: 011-3704-1377 ARGENTINA Yamaha Music Latin America, S.A. Sucursal de Argentina Olga Cossettini 1553, Piso 4 Norte Madero Este-C1107CEK Buenos Aires, Argentina Tel: 011-4119-7000 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanización Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, Panamá Tel: +507-269-5311 EUROPE THE UNITED KINGDOM/IRELAND Yamaha Music U.K. Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700 GERMANY Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 SWITZERLAND/LIECHTENSTEIN Yamaha Music Europe GmbH Branch Switzerland in Zürich Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 01-383 3990 AUSTRIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 CZECH REPUBLIC/SLOVAKIA/ HUNGARY/SLOVENIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-602039025 POLAND/LITHUANIA/LATVIA/ESTONIA Yamaha Music Europe GmbH Branch Sp.z o.o. Oddzial w Polsce ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland Tel: 022-500-2925 THE NETHERLANDS/ BELGIUM/LUXEMBOURG Yamaha Music Europe Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040 EKB54 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 ITALY HONG KONG Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 INDIA Yamaha Musica Italia S.P.A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 Yamaha Music India Pvt. Ltd. 5F Ambience Corporate Tower Ambience Mall Complex Ambience Island, NH-8, Gurgaon-122001, Haryana, India Tel: 0124-466-5551 SPAIN/PORTUGAL Yamaha Música Ibérica, S.A. Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 INDONESIA PT. Yamaha Musik Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 021-520-2577 GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 KOREA Yamaha Music Korea Ltd. 8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 02-3467-3300 SWEDEN Yamaha Scandinavia AB J. A. Wettergrens Gata 1, Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 MALAYSIA Yamaha Music (Malaysia) Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 03-78030900 DENMARK YS Copenhagen Liaison Office Generatorvej 6A, DK-2730 Herlev, Denmark Tel: 44 92 49 00 FINLAND PHILIPPINES NORWAY SINGAPORE Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511 Norsk filial av Yamaha Scandinavia AB Grini Næringspark 1, N-1345 Østerås, Norway Tel: 67 16 77 70 ICELAND Skifan HF Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland Tel: 525 5000 RUSSIA Yamaha Music (Russia) Room 37, bld. 7, Kievskaya street, Moscow, 121059, Russia Tel: 495 626 5005 Yamaha Music (Asia) Pte., Ltd. #03-11 A-Z Building 140 Paya Lebor Road, Singapore 409015 Tel: 6747-4374 TAIWAN Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688 THAILAND OTHER EUROPEAN COUNTRIES Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 AFRICA Yamaha Corporation, Asia-Pacific Sales & Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317 Siam Music Yamaha Co., Ltd. 4, 6, 15 and 16th floor, Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: 02-215-2622 OTHER ASIAN COUNTRIES Yamaha Corporation, Asia-Pacific Sales & Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317 OCEANIA AUSTRALIA MIDDLE EAST TURKEY/CYPRUS Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 OTHER COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jubel Ali, Dubai, United Arab Emirates Tel: +971-4-881-5868 Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 NEW ZEALAND Music Works LTD P.O.BOX 6246 Wellesley, Auckland 4680, New Zealand Tel: 9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN ASIA THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 Yamaha Corporation, Asia-Pacific Sales & Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317 HEAD OFFICE Yamaha Corporation, Digital Musical Instruments Division Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-3273 Yamaha Global Home http://www.yamaha.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Digital Musical Instruments Division © 2011 Yamaha Corporation 103POTY*.*-01A0 Printed in China WW01380
1 / 1

Yamaha NP-11 de handleiding

Categorie
Digitale piano's
Type
de handleiding
Deze handleiding is ook geschikt voor